office@unidome.de

UNIDOME XS

The sustainable product line for concrete components between 18 cm and 50 cm thickness. Climate Protection
The universally applicable, patented, and sustainable product line UNIDOME XS is suitable for use in concrete components between 18 cm and 50 cm element thickness. With Unidome XS, in-situ concrete solutions, semi-precaptured, and fully precaptured concrete elements can be produced with less weight and reduced material usage. Combinations with other construction methods, such as prestressing or a steel composite solution, or even concrete core tempering, are possible thanks to the flexible application possibilities of Unidome components. From point-supported flat slabs with large spans to application in balcony slabs – Unidome makes it easy.
Technische 3D-Darstellung eines grünen Unidome Hohlkörperelements mit Schnittansicht, illustriert die innovative Hohlkörpertechnologie für nachhaltige Bauweisen und Materialeffizienz.

UNIDOME XS

integrated spacers for load-bearing reinforcement
surrounding pins for secure distance control
Simple lock mechanism for quick assembly
integrated support tunnel for high stability
centrally arranged vent opening for clean compaction
optimized stackability to increase transport capacity
material-saving design
available in 11 sizes
Utilizing over twenty years of experience in the development and application of hollow body technologies has enabled the creators of Unidome to design the most advanced concrete formers today. The smallest details in product development enable optimized manufacturing from recycled material, space-saving packaging and transportation, easy and site-appropriate assembly and installation, as well as the necessary quality and stability for use in sustainable projects worldwide.

UNIDOME XS

CLICK TOGETHER – DONE

UNIDOME XS

Here is the table with the product application data:
Unidome XS-H concrete former halves offer an innovative solution for concrete savings in construction. With six different sizes to choose from, they can be used in various combinations to create a total of eleven different concrete former sizes with a precise height gradation of 2 cm. These concrete former halves are packed space-savingly on pallets and delivered to the construction site, where they are assembled into the efficient Unidome concrete formers XS. By using two fixing rods and the Unifix hook, these concrete forming elements can be easily preassembled on site. Unidome XS concrete forming elements not only enable optimized manufacturing from recycled material but also offer easy and site-appropriate assembly and installation. With their high quality and stability, they are ideally suited for sustainable construction projects worldwide. By using this innovative hollow body product, construction companies can achieve concrete savings and at the same time promote environmentally friendly construction practices.

UNIDOME XS

For ceilings between 18 cm and 50 cm

In-situ concrete application

Unidome XS concrete forming elements are installed as an insert between the lower and upper reinforcement layers to displace heavy concrete. The elements also serve as spacers for the upper reinforcement. The concrete formers displace between 3.35 and 12.65 cubic meters of concrete and reduce between 8.4 and 31.6 tons of load per one hundred square meters of hollow body area. In doing so, between 0.7 and 2.7 tons of CO2 emissions per one hundred square meters of hollow body area are avoided.

Semi-precast application

Approved Unidome XS concrete forming elements for use in combination with any construction type, whether in-situ concrete solution, semi-precast application, or precast application. This allows for savings of material, weight, and money everywhere while doing something good for the environment.

Precast application